Extrusion Crossbar Mounts for Stock Racks | 3" Wide

Looking for greater capability out of your stock roof rack? Want an alternative to those racks that cost hundreds of dollars? We’ve got you.

These brackets were designed in-house to allow you to mount a 2-inch or 3-inch wide 10-series extrusion bar to your stock roof rack side rails. This solution increases the usefulness and flexibility of your stock rack while expanding your accessory mounting options — without dropping the Benjamins on an aftermarket rack. Brackets come in pairs to allow you to mount a single rail. Each features precut notches to allow for the addition of t-nuts without removing the rail the rail from the rack as well as integrated tie-down points to secure your gear.

Mounting brackets will come in black powdercoated aluminum with stainless steel mounting hardware for mounting to the stock rack. Bolt in your own extrusion rail and you’re good to go! We recommend TNutz.com for extrusion supplies.

Click here to order your crossbars (NOTE: you need to adjust the length of the crossbar in the cart to fit your vehicle before ordering):

• To order your 3” crossbar: Click here to access our pre-filled cart (one rail with mounting bolts per cart).

We highly encourage you to install the brackets and double check the length of the rails that will fit your vehicle before your place the order for your rails. We have seen minor variations (to the tune of 1/16”) from vehicle-to-vehicle and rail-to-rail. The combined thickness of the two brackets needed to mount a single crossbar is 0.375”.

We have confirmed fitment of these brackets on:

• GX470

• 5th Gen 4Runner

• 4th Gen 4Runner

• 200 Series Land Cruiser/LX570 (NOTE: the rack changed for 2016+ models and likely will not work)

• 100 Series Land Cruiser/LX470

• 80 Series Land Cruiser/LX450

• 2nd Gen Sequoia

• 1st Gen Sequoia

The brackets will NOT mount to:

• GX460

• LX570/600 (2016+)

• Any vehicle that does not have an inside channel on the roof rails as seen in the photos

• Tube-style racks like the FJ Cruiser or TRD Pro 4Runner Rack

May work on other vehicles.